DXF Cut Template — Dry Composting Loo (UD) Cabinet
Units: millimeters · Material: 12 mm birch ply · Kerf: allow ~0.1–0.2 mm/tool pass · All panels labeled in DXF.
⬇️ Download DXF (R12 / AC1009)
| Panel | Size (mm) | Cutouts / Notes |
|---|---|---|
| Top | 460 × 560 | Center pilot & crosshair for UD seat template (cut per seat manufacturer). |
| Base | 460 × 560 | Optional drain tray; pre-drill for cleats. |
| Rear | 460 × 480 | Ø50 mm vent near top-right (fan pulls OUT); add exterior hood + insect screen. |
| Front | 460 × 480 | Service door 280 × 280 (center-low); hinge pilot holes on left side. |
| Left | 560 × 480 | Ø12 mm urine hose grommet (low-rear), downward slope to jerry. |
| Right | 560 × 480 | Plain (add storage cutouts if desired). |
| Internal baffle | 460 × 80 | Vertical, behind seat to guide airflow to vent. |
| Lid stiffener | 436 × 40 | Mount under top near front edge (W − 2×12 mm). |
| Cleats ×4 | 40 × 40 | Corner cleats for base & panels; pre-drill. |
Target external size: W 460 × D 560 × H 480 mm. Adjust to your space by editing the rectangles in CAD. Seat cutout: follow your urine-diverting seat’s paper template (mounting pattern varies by brand).